Masonry · Nashville, TN
Masonry in Cross Plains, TN
Cross Plains masons for brick repair & tuckpointing, chimney repair & rebuild, stone & veneer and more. Mortar matched to the brick, flashing done with the roofer, a written price by the job, across Robertson County and the rest of Middle Tennessee.
Estimate request
What is cracking, crumbling or leaning?
Straight to us, and a reply the same day.
Brick, stone and mortar in Cross Plains homes
Newer brick veneer is a rain screen over a framed wall, and the problems are missing weep holes, cracked lintels and step cracks from settlement; the fix is usually local and the cause is often water.
Rural masonry is stone walls, barn foundations and chimney work on old farmhouses, at a scale and a pace different from subdivision veneer repair.
What the masonry is — veneer over a frame, a solid wall, a chimney, a stone foundation — decides the mortar and the method, and a mason who does not ask has not thought about it.
The ground moves the masonry — clay that pushes a retaining wall, rock that makes a footing, a slope that makes a wall necessary — and the mason reads the ground before the wall.
Cross Plains at a glance
Brick and stone jobs in this town
- Housing stock
- Mostly 1980s onward; median build 1994
- County
- Robertson County
- Ground conditions
- Rolling farm country on the Highland Rim; deep clay
- Permits issued by
- The local codes department for Robertson County
In and around Cross Plains:
- Stoneybrook
- Spring Valley Estates
- Chatman Estates
- Chelsea’s Way
Services
Masonry and brick repair in Cross Plains
Brick Repair & Tuckpointing
Repointing failed mortar joints and replacing spalled brick with a match that does not stand out.
Learn moreChimney Repair & Rebuild
Crowns, caps, flashing and rebuilding above the roofline where the weather does the most damage.
Learn moreStone & Veneer
Natural and manufactured stone on facades, columns, foundations and feature walls.
Learn moreFireplaces & Fire Pits
Outdoor fireplaces, fire pits and grill surrounds built to last outdoors in Tennessee.
Learn moreStone Walls & Steps
Retaining and garden walls, steps and pillars in block, brick and natural stone.
Learn moreFoundation & Structural
Crack repair, lintel replacement and structural brickwork where movement has opened the wall.
Learn moreWhy homeowners here call
Why Cross Plains homeowners call a mason
Middle Tennessee has a large stock of genuinely old brick — pre-war homes across Davidson County, and older commercial and civic buildings throughout the region — and the single most damaging thing done to that brick is repointing with modern Portland mortar. Historic brick is softer than the mortar sold in most builders merchants, and the joint is meant to be the sacrificial element. Get it backwards and the wall pushes its damage into the brick faces instead, which spall and cannot be repointed back.
- Mortar joints that crumble or can be raked out with a screwdriver
- Stair-step cracking through the mortar joints of a brick wall
- Brick faces spalling — popping off in flakes, usually after winters
- A chimney crown cracked, or the chimney leaning away from the house
Portland mortar on soft historic brick. The most expensive mistake in masonry, and it is irreversible.
Nearby
Other towns where our masons work
FAQ
Masonry questions from Cross Plains
Do you cover Cross Plains, TN?
Yes. Our masons work Cross Plains and across Robertson County, with White House, Cottontown, Millersville, Greenbrier inside the same range.
How much does masonry cost in Cross Plains?
Masonry in Cross Plains is priced by the job — tuckpointing by the square foot of wall, a chimney rebuild by the course, a stone wall by the face foot — and the scaffolding and the access are their own lines on a two-story house. Rural masonry is stone walls, barn foundations and chimney work on old farmhouses, at a scale and a pace different from subdivision veneer repair.
Who issues permits for masonry in Cross Plains?
The local codes department for Robertson County permits structural masonry, chimney rebuilds above the roofline in some jurisdictions, and retaining walls over a set height; a repointing job needs none.
How quickly can you get to Cross Plains?
A masonry estimate in Cross Plains is usually within a week or two; the work waits for weather above freezing and is scheduled in the quote.
What areas around Cross Plains do you serve?
Masons working Cross Plains also cover White House, Cottontown, Millersville, Greenbrier; the range is 101 towns across 12 counties.
Free estimate
Brickwork in Cross Plains needing repair?
Show Nashville's Masonry the brick or stone at your Cross Plains home; the mason writes out a price for the job, free.